How to use hydraulic fittings in filter

2020-05-14 11:14:39

We use a lot of hydraulic filters in hydraulic fittings, such as high-pressure filter, oil suction filter, oil return filter, etc. there are about six requirements for use:

1. The key points to determine the filter efficiency of all levels are: the performance requirements of the final filter, the efficiency specifications of the prefilter should be reasonable, and the maintenance of the primary filter and the precision filter should be convenient.

2. The hydraulic filter of the hydraulic fittings increases the filtering area. The filtering area of the filter is large, which can hold more dust and has a long service life. And the filtering area is large, the speed of air flow through the material is low, and the resistance of the filter is small.

3. The hydraulic filter of the hydraulic fittings adjusts the filter efficiency at all levels. If the filter efficiency of the prefilter is low, the dust can be kept in the prefilter by adjusting the filter efficiency of the prefilter.

4. The hydraulic filter of the hydraulic fittings should not emphasize the additional effect of the filter.

5. If there are many willow trees in the filter area, corresponding measures should be taken in the air conditioning design, such as changing the height of the air inlet or adding a protective net at the air inlet. If the measures are not appropriate, there is only one way: change the filter frequently in the floating season.

6. The cleaning technology of hydraulic filter of hydraulic fittings is difficult to promote the filter with high efficiency, and the use occasions are very particular. Even if the filter can not be washed bad, do not wash it, unless you are sure to thoroughly clean it, and the performance will not change after cleaning.