Hydraulic fittings are a wide range of names

2020-05-14 11:06:52

Hydraulic fittings are a wide range of names. The hydraulic filter element is also one of them. The hydraulic filter element is used to regenerate and purify the unqualified turbine oil, especially the turbine oil with excessive acid in the oil. What are its characteristics?

1. The hydraulic fittings adopt three-stage filtration and molecular adsorption technology, and the filter element (imported filter material) is densified step by step to ensure the filtration accuracy.

2. The advanced low-temperature oil treatment technology of Japan is adopted for the hydraulic fittings to solve the difficulty of molecular water removal and completely remove the micro water in the oil.

3. Coalescing oil-water separation and three-dimensional compound flash evaporation make dehydration more efficient and thorough.

4. The back flushing device of hydraulic fittings can ensure the continuity of work and avoid the tedious and possible damage caused by manual cleaning of filter element.

5. The polymer magnetic material filter element can not only effectively break the emulsification, but also adsorb the particles and impurities in the oil, making the oil after purification more clean, and the cleanliness can reach nas6 level.

6. Independent oil regeneration device is adopted for hydraulic fittings to effectively absorb acid and polar substances in oil.

7. Aviation heating elements ensure that the oil is evenly heated to avoid carbonization; the digital display intelligent temperature controller overcomes the defect that the traditional pointer temperature controller can only set one heating point, and can set the upper and lower limits at 0-100 ℃ at will to display the real-time temperature of the oil more intuitively.

8. Automatic oil inlet, outlet and balance oil level; with overpressure, overcurrent, overload, dry burning and other protection measures.

9. The whole machine is interlocked and controlled, and can operate online for more than 200 hours.