Hydraulic parts can be cleaned with diesel oil

2020-05-14 11:18:08

Hydraulic fittings and cylinders push the process to stop the pressure relief required in the process, at (any position) the speed of the main task is to wait for the time to adapt to the pressing which can be completed quickly. The release of each cylinder and the upper end of the workpiece are mainly used to prevent this operation.

Hydraulic parts can be cleaned with diesel, but try to use kerosene as much as possible, as long as it is not a very precise part. Because of diesel or kerosene, the corrosion of hydraulic fittings on the surface of objects is relatively small. After cleaning, blow it thoroughly with air pump and pressure of about 7kg. There is no problem. Kerosene has less corrosion on the surface of the object than diesel